Brown Marmorated Stink Bug (BMSB): Preparing for the Australia 2022–23 Risk Season

Brown marmorated stink bug

Risk and spread of the BMSB

Map showing the spread of the brown marmorated stink bug 

A biosecurity risk

  • A potential and severe pest feeding on more than 300 plant species
  • Often invade vehicles, homes, and factories in large numbers during autumn, looking for shelter over winter
  • Secretes a smelly chemical when threatened that can cause a burning sensation on skin contact
  • Their smell is an aeroallergen that can cause allergic reactions in some people

Addressing the emerging risk

  • Seasonal measures help manage risk during the high-risk season
  • Target high-risk and target-risk goods manufactured in or shipped from the target-risk countries as sea cargo between 1 September 2022 and 30 April 2023 (inclusive) as reflected on the Bill of Lading are subject to BMSB intervention
  • All BMSB treatment providers in target-risk countries must be approved by the Australian Department of Agriculture, Fisheries and Forestry (DAFF), in order to carry out treatment on goods bound for Australia, details can be found on the DAFF website
  • Target high-risk goods shipped as break bulk and including open top and flat rack containers, that arrive untreated, will be prevented from discharge and/or directed for export on arrival. This also applies when treated by an unapproved provider in a target risk country.
  • Air cargo arriving between 1 September and 30 November 2022 (inclusive) from the United Sates and Italy, containing target high-risk chapters 84, 85, 86, and 87 will be subject to random verification inspections

Target-risk countries

  • Any target high-risk or target-risk goods manufactured in, or shipped from, these countries to Australia are subject to seasonal BMSB measures
  • Any vessel that tranships or loads goods from these countries are also subject to heightened vessel surveillance on arrival in Australia

Albania
Andorra
Armenia
Austria
Azerbaijan
Belgium
Bosnia and Herzegovina
Bulgaria
Canada
Croatia
Czechia
France
Georgia
Germany
Greece
Hungary
Italy
Japan
Kosovo

Liechtenstein
Luxembourg
Montenegro
Moldova
Netherlands
Poland
Portugal
Republic of North Macedonia
Romania
Russia
Serbia
Slovakia
Slovenia
Spain
Switzerland
Turkey
Ukraine
United States of America


Emerging risk countries

The following countries have been identified as emerging risk countries for the 2022–23 BMSB risk season and may be selected for a random onshore inspection: United Kingdom and China.

  • China: Random inspections will apply to goods shipped between 1 September to 31 December (inclusive)
  • United Kingdom: Random inspections will apply to goods shipped between 1 December to 30 April (inclusive)

Requirements by commodity type

Target high-risk goods—will require mandatory treatment


44:
Wood and articles of wood, wood charcoal
45: Cork and articles of cork
57: Carpets and other textile floor coverings
68: Articles of stone, plaster, cement, asbestos, mica, or similar materials
69: Ceramic products—including sub chapters I and II
70: Glass and glassware
72: Iron and steel—including sub chapters I, II, III, and IV
73: Articles of iron or steel
74: Copper and articles thereof
75: Nickel and articles thereof
76: Aluminum and articles thereof
78: Lead and articles thereof
79: Zinc and articles thereof
80: Tin and articles thereof
81: Other base metals, cermets, and articles thereof
82: Tools, implements, cutlery, spoons and forks, of base metal, parts thereof of base metal
83: Miscellaneous articles of base metals
84: Nuclear reactors, boilers, machinery, and mechanical appliances, and parts thereof
85: Electrical machinery and equipment, and parts thereof, sound recorders and reproducers, television image and sound recorders, and reproducers, and parts and accessories of such articles
86: Railway or tramway locomotives, rolling-sock and parts thereof, railway or tramway track fixtures and fittings and parts thereof, mechanical (including electro-mechanical) traffic signalling equipment of all kinds
87: Vehicles other than railway or tramway rolling-stock, and parts and accessories thereof
88: Aircraft, spacecraft, and parts thereof
89: Ships, boats, and floating structures


All target-risk goods—will be subject to increased onshore intervention through random inspection


27:
Mineral fuels, mineral oils, and products of their distillation, bituminous substances, mineral waxes
28: Inorganic chemicals, organic or inorganic compounds of precious metals, of rare-earth metals, of radioactive elements or of isotopes—including sub chapters I, II, III, IV, and V
29: Organic chemicals—including sub chapters I, II, III, IV, V, VI, VII, VIII, IX, X, XII, and XIII
38: Miscellaneous chemical products
39: Plastics, and articles thereof—including sub chapters I and II
40: Rubber, and articles thereof
48: Paper and paperboard, articles of paper pulp, of paper, or of paperboard
49: Printed books, newspapers, pictures, and other products of the printing industry; manuscripts, typescripts, and plans
56: Wadding, felt, and nonwovens, special yarns, twine, cordage, ropes, and cables, and articles thereof


All other goods—will only be subject to requirements if part of a consignment packed in a container with target high-risk or target-risk goods.


Addressing the risk of infestation

Mandatory treatment requirements: Target high-risk goods require treatment to mitigate stink bug risks.

Treatment options

  • Heat treatment
  • Methyl bromide fumigation
  • Sulfuryl fluoride fumigation
  • Sulfuryl fluoride—using third-party system

Treatment information

  • Details on treatment options can be found on the DAFF website.
  • Review the approved list of offshore and onshore treatment providers.
  • Goods must be loaded into a container and sealed or loaded onto a vessel for export from target-risk countries within 120 hours of treatment.
  • Where evidence can be provided indicating the goods were unavoidably rescheduled and loaded onto another vessel within 48 hours outside of the 120-hour post treatment window, please contact [email protected] prior to the vessel's arrival to Australia.

Navigating on and offshore treatment requirements: Offshore treatment

  • Required for target high-risk goods shipped as break bulk
  • Includes open top and flat rack containers
  • Target high-risk goods that arrive untreated will be prevented from discharge and/or directed for export on arrival

Offshore or onshore treatment

  • Target high-risk goods shipped as FCL in sealed six hard-sided containers can be treated offshore or onshore at the container level by approved treatment providers.
  • LCL consignments and FAK containers will be managed at the container level prior to deconsolidation, the container must be either treated offshore or onshore before deconsolidation is permitted.
  • Target high-risk goods which have been manufactured in a target-risk country and are transported from a target-risk country to Australia, will be subject to the seasonal measures and mandatory treatment applies to the goods at the container level. No deconsolidation will be permitted prior to treatment.
  • Target high-risk goods manufactured in target-risk country, then transported from a target-risk country to a non-target risk country, to be deconsolidated and reconsolidated (hubbed) and shipped as an LCL/FAK container from the non-target risk country to Australia will be subject to the seasonal measures. Mandatory treatment applies to the goods at the container level. No deconsolidation will be permitted prior to treatment.

Packing requirements

  • To conduct an effective BMSB treatment, goods must be presented in a manner that allows the heat or fumigant to reach all external and internal surfaces of the goods accessible to the pest

Visual of proper wrapping of commodities for BMSB prevention 

  • If the goods requiring treatment are plastic wrapped, the plastic wrapping must be slashed or adjusted to allow adequate access for the fumigant or heat to penetrate the goods for the treatment to be effective

Close up of appropriate wrap for BMSB

 

Minimise delays when treatment is required

  • Potential delays on arrival due to lack of onshore treatment resources
  • Reduce impediments by utilising offshore treatment by approved providers
  • Provide early and accurate documentation, including all the details of treatment
  • Expect treatment certificates to be checked for compliance
  • Non-compliance with regulations will result in exportation of shipment


Customer testimonial


“They have good knowledge of the countries we import from and provide constant updates with the current supply chain challenges, and offer sound advice in relation to trade requirements, biosecurity, and customs matters.”
Kubota

Kubota



Work with C.H. Robinson’s Trusted Advisor® experts to understand your specific risks and next steps.